Nt SUIT

The Nt Suit is a special F-EMS suit with dry electrodes. Impulse areas necessary for electromyo stimulation are placed directly on the skin in their ideal position by the suit. The Nt Suit also comes with connection device for the Nt Core.

The Nt Suit is available for women and men in two different versions, each version comes in five (5) different sizes. An optional waist belt is also available for optimum fit.

TECHNICAL SPECIFICATION

Colour  

Black

Sizes 

Men : S, M, L, XL, XXL  /  Women :  XS, S, M, L, XL

Electrode positions  

8 electrode positions: neck, upper arm, chest, stomach, thigh, upper back, lower back and buttocks

Material

Suit including electrodes: 63% polyamide, 15% elastane, 13% polyester, 7% polyurethane, 2% pure silver. 

Printed circuit board components RoHS and REACH compliant.
Contact plate: Copper, ethoxyline, polyurethane, Nd-Fe-B magnets based on RoHS law 2002/95/EC.

Cleaning

Gentle wash cycle (easy-care) at a maximum of 30°C, spin speed between at least 800 rpm and 1200 rpm, we recommend not to use any detergent at all – silver is the best bactericide, if necessary use only PH-neutral detergent, but no fabric softener, close the Velcro ® fastener before washing, do not wash from the inside out, use the supplied laundry bag, do not wring out, do not tumble dry, do not dry in direct sunlight, do not bleach, do not iron, do not dry clean, do not soak, do not leave wet for long periods, after use or after washing hang up for more evaporation (loop in the middle of the back)

Connectors

Connection to the Nt Core via magnetic connector

Operating conditions

Temperature: 0°C to +30°C (32°F to 86°F), humidity: >30%

Storage conditions

Temperature: 0°C to +25°C (32°F to 77°F), humidity: <70 %

Additional important information

Select the suitable size. This suit is a sensitive device, please use it carefully. Tiny threads, small bubbles, yellowing on the electrodes after use does not usually affect the function. Be careful not to bend or break the contact plate. Only clean the magnetic connectors with alcohol (from 98 %) if there is some rust on them. Keep the suit away from fire, steel, iron and magnets. Never use the suit in a wet condition as it will cool your body down.